When scraper conveyor transports materials, materials are squeezed due to pushing force of scraper chain in the running direction,under the constraints of material self gravity and casing side plate, internal friction is generated among materials,which ensures the stable state between material layers, and it can overcome the frictional resistance which is caused by moving materials inside the trough casing, in this way, materials are transported with scraper chain and moving forward, form the continuous and whole material flow.
MC inclined scraper chain conveyor is a kind of continuous conveying equipment for powder,particle and small block bulk material.Materials are transported forward with help of the moving scraper chain.It is suitable for the application occasion that requires enclosed transportation with not very large capacity,complicated layout with multi material loading points as well as multi unloading points.This scraper conveyor is widely used in industries like coal, grain, chemical,metallurgy, mining, machinery, light industry, electric power, building materials and environmental protection departments.
Material to be processed: _____
Bulk Density: _____t/m3
Material size:____mm
Handling capacity :_____t/h
Center distance from inlet to outlet:______m
Installation angle: ________°
Working power supply: _____V ______HZ
● Casing with enclosed and bending process will prevent water ingress
● Scraper chain is rigid connection,failure seldom occurs during operation
● Scraper conveyor chain is 45CrMo,more wear-resistant and has a higher intensity
● Steel liner plate can be added to avoid wear and abrasion as per requirement
● An inclined angle ranges from 30°to 90° is allowed to fit your project
● Conveying distance reach up to 40m to meet various conveying requirement
● Material temperature can reach up to 120 ℃
● Trough width can be160-500mm to meet different throughput
4.Scraper conveyor body
1, scraper, chain
(1) Scraper bending deformation shall not be greater than 5mm. The wear length of the double-chain and medium-chain scraper shall not exceed 10mm.
(2) The elongation of the ring chain must not exceed 2% of the design length. Chain ring diameter wear should not exceed 1-2mm.
(3) When assembling old chains, chains with the same degree of wear should be assembled together to ensure the same length of the chain.
(4) The bolts and nuts used to connect the scraper to the chain must have the same type and specifications. The
2, scraper conveyor chute br /> (1) chute plane deformation shall not exceed 4mm.
(2) Welds shall not be welded, and the wear of the middle plate and floor shall not exceed 30% of the design thickness (locally not exceeding 50%).
(3) The connection between the chute and the transitional tank shall not exceed 2mm on the upside down and 4mm on the left or right side.
(4) The chute overlapped part without curling.
(5) The chute connector must not be welded or broken. The hole wear is no more than 10% of the original design.
(6) The width of the upper and lower edges of the chute groove should not exceed 5mm.
(7) The floor of the chute must not be significantly deformed.
Home Products Company Projects Service＆Support Newsroom Contact Us