Grain scraper chain conveyor is a light type of buried scraper conveyor which to transport grain into several silos.
Compared with the ordinary type, the casing thickness of QMS type is smaller, thus loses the whole weight and saves money.
Grain scraper chain conveyor can be widely used to convey grain such as soybean, wheat, rice, flour etc.
● Completely enclosed for clean plant operation, environmental friendly.
● Large capacities for conveying in a compact space.
● Light weight compared with other kind of buried scraper conveyor.
● Can reach multipoint charging and discharging.
● Variety of side & bottom abrasive resistant steel liners.
● Flexible arrangement, singly work or cooperate with other equipment can be achieved.
● With screw take-up device, can take-up itself automatically, to avoid chain take off.
● Length can be custom-made according to your requirement.
Light Duty Rice Scraper Chain Conveyor mainly consists of closed section shell (trough), scraper chain, driving device, tensioning device and safety protection device and other components.
Equipment structure is simple, small size, good sealing performance, installation and maintenance is relatively convenient;
Light Duty Rice Scraper Chain Conveyor can be multi-point charging, multi-point discharging, process selection and arrangement is more flexible; in the transportation of flying, toxic, high-temperature, flammable and explosive materials, it can improve the working conditions, reduce environmental pollution. Models are: general-purpose, hot material, high-temperature, wear-resistant, special type for soda ash (ordinary type, high-efficiency type), special type for grain, special type for cement, special type for power plant, etc., with a trough width of 160-1250mm.
Light Duty Rice Scraper Chain Conveyor has the following requirements for materials:
(1) Loose density of materials: p=0.2~2.5t/m3
(2) Material temperature: general model for material temperature less than 120 ° C; hot material type conveying material temperature of 100 ~ 450 ° C, instantaneous material temperature is allowed to reach 800 ° C.
(3) Water content: water content and material degree, viscosity related, generally should be pinched into a ball and scattered after the hand can still be loosened to the degree.
Home Products Company Projects Service＆Support Newsroom Contact Us