To dewater material effectively, damp material is feed onto a steep, downward inclined screen surface at the feed end of the dewatering Screen to achieve rapid drainage.
A pool of water begins to form in the valley as material builds up on the slightly upward inclined surface. Counter rotating motors create a linear motion, driving solids uphill, while liquid drains through the screen media. The uphill slope of the screen, along with a discharge weir, creates a deep bed that acts as a filter medium, allowing retention of material much finer than the screen openings.
When the two vibrating motor that installed vertically on the dewatering screen rotate relatively, the eccentric block of two vibrating motors produce rated excitation force. The horizontal excitation force will cancel each other out, the vertical excitation force is transported to the whole screen surface through the body mass vibration.
It is widely used in metallurgy industry,such as sinter ore, sintering and palletizing, ore classification in mine industry, classification dehydration and referral, etc. This is the first choice for large sintering plant, Palletizing plant, Concentrator, Coal Preparation Plant, Coal Washrag and also the ideal substitutes of large vibration screen for the international project.
Model | Screen area | Mesh Size | Feeding Size | Frequency | Amplitude | Motor | Power | Capacity |
ZSM1542 | 6 | 0.25-13 | ≤300 | 800 | 9-10 | Y160M-4 | 11 | 30-60 |
ZSM1556 | 8 | 13-50 | ≤300 | 800 | 10 | Y160L-4 | 15 | 30-60 |
2ZSM1556 | 8 | U:13-50 | ≤300 | 800 | 11 | Y160L-4 | 15 | 30-60 |
ZSM1556B | 8 | 13-50 | ≤300 | 800 | 11 | Y132M-4 | 7.5×2 | 30-60 |
2ZSM1556B | 8 | U: 13-50 | ≤300 | 800 | 11 | Y132M-4 | 7.5×2 | 30-60 |
ZSM1756A | 9.5 | 13-50 | ≤300 | 800 | 10 | Y160L-4 | 15 | 50-80 |
2ZSM1756 | 9.5 | U:13-50 | ≤300 | 800 | 10 | Y160L-4 | 15 | 50-80 |
ZSM1756B | 9.5 | 13-50 | ≤300 | 800 | 10 | Y132M-4 | 7.5×2 | 50-80 |
2ZSM1756B | 9.5 | U:13-50 | ≤300 | 800 | 10 | Y132M-4 | 7.5×2 | 50-80 |
ZSM1856 | 10 | 13-50 | ≤300 | 800 | 11 | Y160M-4 | 11 | 50-80 |
ZSM2065 | 13 | 13-50 | ≤300 | 800 | 11 | Y180M-4 | 18.5 | 70-100 |
2ZSM2065 | 13 | U:13-50 | ≤300 | 800 | 1 | Y180M-4 | 18.5 | 70-100 |
ZSM2065B | 13 | 13-50 | ≤300 | 800 | 9 | Y160L-4 | 11×2 | 70-100 |
2ZSM2065B | 13 | U:13-50 | ≤300 | 800 | 11 | Y160L-4 | 11×2 | 70-100 |
● PK Machinery attaches great importance to technology exchange and strategic cooperation with other countries.
● What’s more, we actively expend overseas markets by mature products and perfect service systems.
● By the end of 2015, our products have been successfully exported to over 60 countries and regions.
● Such as the United States, Canada, Brazil, Chile, Peru, the United Kingdom, Germany, Italy, Russia, Ukraine, Kazakhstan, Iran, Saudi Arabia, India, Pakistan, Malaysia, Thailand, South Africa, Ethiopia, Australia,etc.
Home Products Company Projects Service＆Support Newsroom Contact Us