Grain Seed Efficient Double Channel Link Chain Bucket Elevator

1. Double casing with large throughput up to 1600m3/h, high hoisting height can reach 75m.

2. Driving device brand can be domestic or imported brand as per your demand

3. Rubber belt made of woven wire rope, good toughness and high strength.

4. Total-enclosed design,small environmental pollution and clean working condition

5. Vertical shaft gearbox,fluid coupling and backstop device ensures steady running

6. Customized height to meet your individual elevating requirement

7. Wide application range in various industries and sectors

Head material return is serious: first, the hopper design is unreasonable, the material can not be unloaded; Second, the bucket speed is low; Third, the head unloading height is not enough; Fourth, the gap between the lip plate and the lip of the hopper is too large.

Head shaft fracture: First, the strength of the head shaft is not enough, which is mainly not heat treatment or heat treatment temperature is not enough; Second, the material selection of the head shaft is unreasonable; Third, the design structure of the head shaft is unreasonable, and there may be excessive step to produce stress concentration; Fourth, long-term overload operation, resulting in fatigue fracture.

Drop bucket: First, the strength of the hopper bolt is not enough, long-term operation is cut; Second, the hopper bolt is loose, easy to fatigue fracture; Third, there is a clamping phenomenon in the operation of the hopper; Fourth, the hopper bolt and nut are not welded tightly after fastening, resulting in loosening and falling off.

Hopper wear serious: first, the material polishing is strong, hopper lip material is not wear-resistant; Second, the size of the material is large, and it is difficult to cut the material in the hopper; Third, the hopper running speed is too high; Fourth, there is the phenomenon of card collision in the operation of the hopper.

The tail material accumulation is serious: first, the hopper lifting machine incoming material is not uniform, resulting in stuffy car; Second, the lifting capacity of the bucket can not meet the needs; Third, too much material is returned.

Bucket lifting machine vibration and noise is larger: first, bucket lifting machine perpendicularity is abnormal, the head and tail wheel is not in the center; Second, there is a clamping phenomenon in the operation of the hopper; Third, the hopper is skewed and the tail shaft is not level, resulting in side force; Fourth, the chain deformation, resulting in mid-swing.